Profitap
Category
Profitap
Showing 1–12 of 41 results
-
1-Link Gigabit Copper TAP Battery Backup
Read moreGigabit Copper TAP with Battery Backup
Profitap C1R-1G-BAT provides complete visibility and access for in-line monitoring of 10/100/1000Base-T networks. The C1R-1G-BAT creates an exact copy of the network traffic, including low-level errors and VLAN traffic, providing full-duplex traffic to the monitoring tools. C1R-1G-BAT features No Break fail-safe technology: unlike conventional fail-safe features, No Break switches quickly enough that it does not cause the network link to renegotiate. The integrated Data Diode feature protects the network from any injection of data from the monitor ports. Fitted with a backup battery, the C1R-1G-BAT Gigabit Ethernet TAP is suited for high availability networks, as it fully prevents network disruptions in case of power failure.
-
1-Link Gigabit Copper TAP with -48V Powering
Read moreThe C1R-1G-48V Gigabit Ethernet TAP is designed to provide secure access for monitoring 10/100/1000Base-T networks in the telecom industry, as it uses redundant -48 VDC powering. This 1-Link Gigabit TAP features the No Break fail-safe functionality which drastically reduces failover time in the event of a power failure, consequently reducing the chances of Spanning Tree (STP) reconvergence. No Break technology allows the TAP to instantly resume the link once power is restored. The integrated Data Diode feature protects the network from any injection of data from the monitor ports.
-
10G Bypass TAP
Read moreF1-10G-BP
Bypass Network TAP for Optimal Network Security
The F1-10G-BP ensures fail-safe access for in-line security and performance tools, such as IDS/IPS and NGFW, and prevents these in-line tools from being single points of failure in the network. The Profitap 10G Bypass TAP is placed in front of in-line security appliances to keep the network link operational even if the TAP itself becomes unavailable.
The 10G Bypass TAP actively checks the availability of the in-line tools by sending heartbeat packets. If the in-line tools are compromised, the Bypass TAP automatically switches to bypass mode, maintaining the traffic flow through the network.
-
10GBASE-T TAP
Read more10M/100M/1G/10G Copper Monitoring
Profitap 10GBASE-T TAP provides fail-safe access for monitoring 10M/100M/1G/10G copper traffic. The 10GBASE-T TAP creates an exact copy of full-duplex copper network traffic, including low-level errors, and sends it to the monitoring devices. In order to prevent network downtime, the 10GBASE-T TAP supports link failure propagation (LFP), which transmits link failure errors between ports, allowing the network to activate a redundant path, while the TAP stays available for auto-negotiation. Profitap 10GBASE-T TAP is non-intrusive, has no IP address, and isolates monitoring devices from the network to ensure complete stability and security. The integrated Data Diode feature protects the network from any injection of data from the monitor ports.
-
1G DIG Copper TAP
Read moreWith DIN rail mount and 20-30 VDC powering
Industrial Gigabit Copper TAP with DIN Rail Mount
Profitap C1D-1G is a compact, lightweight, portable Gigabit Ethernet TAP that features a DIN rail clip and 20-30 VDC redundant powering for use in industrial network infrastructure. C1D-1G provides secure, passive network access for monitoring 10/100/1000 Mbps without introducing a single point of failure to the network. It monitors all 7 OSI layers and mirrors packets of all sizes and types, low-level errors, and VLAN traffic. It also features PoE passthrough, as well as No Break — a feature which ensures a very short recovery time of the network link, thanks to the use of high-speed relays, and allowing network traffic to pass through the TAP even when power is disrupted. The integrated Data Diode feature protects the network from any injection of data from the monitor ports.
-
1Link Gigabit Copper TAP
Read moreIn certain situations, it is useful to set up more than one monitoring system on a single link. The C1-1G-RG2 is designed to facilitate such a situation. It duplicates and outputs traffic from one in-line link to up to two monitoring systems. The C1-1G-RG2 is a cost-effective solution that provides a secure access to monitor full-duplex 10/100/1000 Mbps traffic at wire speed. The C1-1G-RG2 features a fail-safe in-line design that ensures uninterrupted network operation in case of power loss. This allows the traffic to pass through the TAPs even when power is disrupted. The integrated Data Diode feature protects the network from any injection of data from the monitor ports.
-
40G Bypass TAP
Read moreF1-40G-BP
Fail-safe Solution for Optimal Network Availability
The Profitap 40G Bypass TAP provides secure access for monitoring active in-line network security and performance tools. It is a fail-safe solution that actively checks the availability of in-line tools by sending heartbeat packets.
If the tools’ availability is compromised in any way, the TAP automatically switches to its bypass mode, maintaining the network link up until the issue is resolved. The Bypass TAP also allows network engineers to manually bypass the in-line tools, keeping the network fully operational during maintenance and troubleshooting.
-
4x10G Bypass TAP
Read moreF4-10G-BP
In-Line Protection for up to 4x10G Network Links
The F4-10G-BP Bypass TAP provides fail-safe in-line access for the monitoring of up to 4 in-line 10G links. It prevents the in-line network security and performance tools from being single points of failure and ensures high availability and security for your networks.
The F4-10G-BP Bypass TAP actively checks the availability of the in-line tools by sending heartbeat packets. If the tools’ availability is compromised in any way, the TAP automatically switches to its bypass mode, maintaining the traffic flow through the network until the issue is resolved.
-
8-Link Gigabit Copper TAP
Read moreC8-1G is a high density Gigabit Ethernet TAP providing secure and fail-safe access for monitoring multiple network links. This 8-Link Gigabit TAP enables the monitoring of 8 full-duplex copper links at 10/100/1000 Mbps in a single RU. C8-1G features redundant power supplies ensuring automatic failover in case of power failure. The integrated Data Diode feature protects the network from any injection of data from the monitor ports.
Once in place, this network TAP allows your monitoring devices to be connected and disconnected as desired, with no impact to the network link.
-
BiDi Fiber TAPs
Read moreBiDi Fiber Optic TAPs are designed to give permanent in-line network access to monitor bidirectional fiber networks. Profitap 40/100G BiDi TAPs allow you to obtain complete visibility to duplex 40/100G Cisco bidirectional links. Profitap Bidirectional PON TAPs enable the monitoring of simplex bidirectional single-mode connections.
- 1-Link 40/100G BiDi TAP
- 3-Link 40/100G BiDi TAP
- 1-Link Single-Mode BiDi Fiber TAP
- 3-Link Single-Mode BiDi Fiber TAP
- 6-Link Single-Mode BiDi Fiber TAP
-
Booster In-Line
Read more4 x 10/100/1G In-Line Links to 1 x 1/10G
The Booster In-Line Gigabit Copper Aggregation TAP connects 4 x 10/100/1G in-line links to one 1/10G output port, providing fail-safe traffic aggregation and speed conversion in a single compact device.
The Booster supports ingress VLAN tagging, as well as link failure propagation (LFP) — a feature which transmits link failure errors between ports, allowing the network to activate a redundant path, while the TAP stays available for auto-negotiation.
-
Booster SPAN
Read more8 x 10/100/1G SPAN to 1 x 1G/10G
The Booster SPAN Aggregation TAP connects 8 x 10/100/1G out-of-band connections to one 1/10G output port, providing traffic aggregation and speed conversion in a single compact device.
The Booster SPAN supports ingress VLAN tagging, allowing you to identify traffic from each individual port.