1Link Gigabit Copper TAP
In certain situations, it is useful to set up more than one monitoring system on a single link. The C1-1G-RG2 is designed to facilitate such a situation. It duplicates and outputs traffic from one in-line link to up to two monitoring systems. The C1-1G-RG2 is a cost-effective solution that provides a secure access to monitor full-duplex 10/100/1000 Mbps traffic at wire speed. The C1-1G-RG2 features a fail-safe in-line design that ensures uninterrupted network operation in case of power loss. This allows the traffic to pass through the TAPs even when power is disrupted. The integrated Data Diode feature protects the network from any injection of data from the monitor ports.
Documents:
Key Features
- Non-intrusive in-line network access
- Permanent network link guaranteed
- Fail-safe in-line design ensures uninterrupted network operation in case of power loss
- Monitoring of all 7 OSI layers
- And more
Complete visibility into your 10M/100M/1G/10G copper networks
Profitap Copper TAPs provide complete access and visibility into your network by creating an exact copy of full-duplex 10M/100M/1G/10G traffic at wire speed with no impact to the network link. Profitap Copper TAPs introduce no point of failure to the network. They are designed for redundant powering, which allows a second power supply to activate if the first were to become unavailable. In case of complete power loss, Profitap Copper TAPs guarantee that the link remains operational by instantly switching to a fully passive mode.
To maintain the network connection and prevent any interruption in traffic flow, all Profitap Active Copper TAPs feature the No Break fail-safe functionality — a quick switching mechanism which ensures a very short recovery time of the network link, thanks to the use of high-speed relays, and allowing network traffic to pass through the TAP even when power is disrupted.
 | Security Profitap Copper TAPs are non-intrusive, have no IP address, and isolate monitoring devices from the network to ensure complete security. |
 | Visibility Profitap Copper TAPs are completely IEEE 802.3/802.3af, VoIP and PoE compliant, while performing smoothly at distances of over 100 meters. |
 | Fail-Safe Our Copper TAPs introduce no point of failure to the network. They are designed for redundant powering, allowing a second power input to activate if the first were to fail. |
The most effective way to monitor your copper networks
For situations where you want to monitor a single, critical network segment using several tools, a Replication TAP is what you need. A replication TAP sends copies of the network traffic to multiple monitoring tools simultaneously.
That crucial network segment’s traffic could then be monitored by an intrusion detection system (IDS), recorded for later forensic examination, captured for future use, or analyzed for performance issues. This type of TAP is useful when a critical segment needs to be monitored by an array of security and compliance tools simultaneously.
- Non-intrusive in-line network access
- Permanent network link guaranteed
- Fail-safe in-line design ensures uninterrupted network operation in case of power loss
- Monitoring of all 7 OSI layers
- No packet loss, no point of failure
- Data Diode function prevents any injection of data from the monitoring ports back into the network
- Fully 802.3af & VoIP compliant, PoE passthrough
- Low power consumption
- Supports link failure propagation (LFP)
- Redundant powering
| Network Link | Monitor Output | Speeds | Footprint | Power | AC Adapter |
| 1 | 2 | 10/100/1000 Mbps | Up to 3 in 1U | 12 VDC | 100–240 VAC |