OFFICE : +971 4546 3606
OFFICE : +971 4546 3606
LinkRunner® G2

LinkRunner® G2

The LinkRunner G2 simplifies network validation and configuration of copper and fiber Ethernet networks, streamlining workflows by combining essential functions of installation and triage in a single, ruggedized unit. Accelerate deployments, speed problem identification, and improve the efficiency and effectiveness of network operations with this next-generation Android-based tester. The LinkRunner G2 features an intuitive design that runs Android-based apps with smartphone-like features.

Enhanced AutoTest diagnostics for configuration and validation of copper and fiber Ethernet networks and devices

• Discover VLANs, nearest switch name, and port information via CDP/LLDP/EDP for your managed switches
• View TruePower™ loaded 4-pair PoE test for up to 90W and 802.3bt PSE
• Install and run your favorite Android apps for speed tests, device configuration, and workflow management with Android-based OS with smartphone-like features
• Automate reporting and enable collaboration with upload and management of test results via Link-Live Cloud Service

Datasheet - LinkRunner® G2

Datasheet - LinkRunner® G2

NetAlly Wired and Wireless Product Family

NetAlly Wired and Wireless Product Family

LinkRunner G2 vs. LinkRunner AT Comparison

LinkRunner G2 vs. LinkRunner AT Comparison

Documents:

Datasheet - LinkRunner® G2

Datasheet - LinkRunner® G2

NetAlly Wired and Wireless Product Family

NetAlly Wired and Wireless Product Family

LinkRunner G2 vs. LinkRunner AT Comparison

LinkRunner G2 vs. LinkRunner AT Comparison

Key Features

  • Discover nearest switch name and port information via CDP/LLDP/EDP and verify link speed/duplex and network connectivity with AutoTest.
  • Validate up to 90W Power over Ethernet (PoE) PSE in one AutoTest – useful during IoT, VoIP, and Wi-Fi deployment.
  • Install and run preferred Android-based apps for speed tests, device configuration, and workflow management with smartphone-like features.
  • Automate reporting and enable collaboration with upload and management of test results via Link-Live Cloud Service.

The LinkRunner G2 uses the IEEE Link Layer Discovery Protocol (LLDP), plus the Cisco and Extreme Discovery Protocols (CDP and EDP) to display the VLAN and nearest switch model, slot, and port.

The LinkRunner G2 displays critical nearest switch information include:

• Switch name and model
• Switch chassis, slot, and port #
• Switch IP Address
• VLAN’s supported
• Duplex and speed (actual and advertised)
• Signal strength
• Connection (MDI or MDI/X)
• PoE voltage and power (actual and test limit)

LinkRunner G2 is the first field tester able to validate loaded PoE performance by drawing actual power up to 802.3bt 90W across all four pairs. Load the circuit to stress switches, cabling, and patch panels, all while measuring the voltage and pairs being used. Using the TruePower test to validate the power delivery before installing IoT connected devices ensures a smooth deployment and helps to alleviate finger-pointing.

The LinkRunner G2 packet reflector mode can be used as a remote device during end-to-end network path performance tests to validate LAN and WAN throughput capabilities up to 1Gbps.

LinkRunner G2 supports packet reflection for:

• OptiView® XG Network Analysis Tablet
• OneTouch™ AT Network Assistant

The LinkRunner G2 can monitor and show traffic distribution of the top 9 VLANs and capture 2GB of packets at line-rate.

Serving as a centralized test results and device management system, the complimentary Link-Live cloud service transforms team workflows with the ability to quickly and easily log, document, and report test activity from all LinkSprinter, LinkRunner AT, LinkRunner G2, AirCheck G2, and OneTouch AT hand-held network testers. Once the instrument is connected to the Link-Live Cloud Service, your test results are automatically uploaded to the dashboard for project management and reporting. You have the option of uploading additional files, screenshots, images, profiles, packet captures, location information, and comments anytime. Also, certain NetAlly instruments with AllyCare Support can receive firmware updates “over the network” from Link-Live as they become available.

An API is available to retrieve and integrate data from Link-Live into other management platforms, such as your trouble-ticket application or network management system. This gives you the ability to easily provide proof-of-performance and better manage jobs and staff efficiency.

This unified dashboard of both wired and Wi-Fi network connectivity results enables you to:

• Reduce results management overhead for multiple testers and users
• Enables seamless collaboration between site personnel and remote experts
• Simplify report generation across media types for network deployment documentation
• Attach photos, user comments to each result, adding context for future changes and troubleshooting
• For asset management, ability to associate serial numbers of installed devices, and/or cable/wall jack label to specific test results