IntelliTone™ Pro 200 Toner and Probe Kit
The IntelliTone™ Pro 200 LAN Toner and Probe Series from Fluke Networks is the first network cable toner tracer and probeto offer digital and analog signaling all in one network toner and probe. That means it’s equipped with the most powerful cable tracing and location technologies for any work environment. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate individual wire pairs, and trace voice, audio, and video cabling.
Datasheet - IntelliTone™ Pro 200 Toner and Probe Kit
Datasheet - IntelliTone™ Pro 200 Toner and Probe Kit
Documents:
Datasheet - IntelliTone™ Pro 200 Toner and Probe Kit
Datasheet - IntelliTone™ Pro 200 Toner and Probe Kit
Key Features
- Digital vs Analog
- Locate and Isolate Cabling
- Verify Cable Continuity
- Tone Live Networks
- Verify Ethernet Service
• Digital network cable toner and probe traces and locates cables on active network.
• Ends network cable location confusion, decisively rejects noise and false signals
• Network cable tracer locates cables on active networks, even when terminated at a switch
• Isolates cable and wiring within a bundle, despite cable bleed
• Confirms cable location, verifies cable continuity, and detects cable faults (opens, shorts, and reversed pairs) in one step
• Signal strength indicator LEDs so you can help identify one cable that is bundled with other cables
• Probe has built-in pair tester to identify open, shorted and crossed pairs
• SmartTone® analog toning technology
• Isolates individual wire pairs precisely by changing tone when shorted
• Effectively traces and locates voice, audio, and video cabling
| Toner specifications | |||||||
| Toner interface | Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling. F Connector for coaxial cabling Banana Jack Plugs (2) - two conductor wiring | ||||||
| Toner frequency | IntelliTone™ signal: encoded digital signal | Analog SmartTone signal: 500 - 1200Hz, 4 songs | |||||
| Auto power down | Turns off automatically after 2 1/2 hours of inactivity | ||||||
| Probe specifications | |||||||
| Audio | IntelliTone: Microprocessor controlled audio files | Analog: Detected toner signa | |||||
| Control | Thumbwheel switch, volume control wheel | ||||||
| Tone detection | Detects IntelliTone™ digital signal for Locate, Isolate, and Cable Map | Detects analog SmartTone signal (500-1200Hz) and other analog toners. | |||||
| Toner interface | Main Mod8 port for Cable Map on all 4 pairs of UTP / STP cabling. | ||||||
| Auto power down | Turns off automatically after 1 hour of inactivity | ||||||