+971 4 320-6053

Welcome to Synergix International!

Gallery loading...
Mouseover Zoom loading...


IntelliTone Pro 200 Probe

This product, you earn 15 loyalty point(s).
AED 618.75

Availability: In stock



Fluke Networks MT-8200-63A IntelliTone Pro 200 Probe

  1. Supports digital signaling on CAT5e/6/6a data cabling and analog toning on voice-grade, coax, security/alarm, and speaker cabling
  2. Probes to identify individual pairs and miswires, and checks 10-/100-/1000-Mbps connectivity with NIC/hub indication
  3. Can be used with all types of copper cabling
  4. Identifies and diagnoses POTS with Line 1 and Line 2 service and polarity
  5. Eliminates confusion over cable location
  6. Locates cables on active networks
  7. Isolates a cable within a bundle, even with cable bleed
  8. Verifies installations with end-to-end continuity tests
  9. Detects opens, shorts, and reversed pairs
  10. Digital signal processing rejects noise and false signals
  11. Works safely on active networks
  12. Provides visual and audible signal strength identification.

Fluke Networks MT-8200-63A IntelliTone Pro 200 Probe detects IntelliTone digital signals, rejecting noise and false signals, to locate and trace data cabling on active networks. It detects 500 to 1,200 Hz analog signals to isolate individual wire pairs and trace voice, audio, and video cabling on inactive networks. The probe detects signals at cable racks, in patch panels, and even behind walls, and identifies detected signals audibly and with eight LEDs that light successively as the signal strength increases for prompt isolation of a single cable within a bundle. A sync LED shows battery strength at power-up and confirms reception of IntelliTone signals. The probe turns off automatically after one hour of inactivity. Tone probes are used by network technicians to troubleshoot and maintain wires and cable in telephone and data networks.

The Pro 200 probe has a cable map function that allows it to validate RJ11 and RJ45 connectors by testing continuity and finding short circuits, open circuits, and crossed-pair wiring faults on all four pairs of UTP and STP twisted pair cabling. RJ11 and RJ45 jacks plug into a port on the bottom of the probe.


Digital vs Analog

Only IntelliTone™ Pro Toners and Probes offer the powerful combination of digital and analog technologies to resolve common infrastructure problems that arise during installing, maintaining, and changing of your network. 

Digital and analog toning in one tool. 
Today’s media networks are more diverse than ever.  Most buildings have a combination of telephone, twisted-pair data, coax, and security/alarm wiring.  Verifying proper routing and termination of this diverse set of cabling types requires tools optimized for different frequencies, connector types, and work environments.  Until now, no single tool has combined the right technologies to operate across all copper media types, and in all environments.  IntelliTone Pro changes that by combining cutting-edge digital and analog signaling to locate and verify virtually any copper cable, regardless of application or environment. 

When to use digital
IntelliTone Pro’s digital encoded signal should primarily be used on high-grade data cabling (Cat 5e/6/6a), and in active network environments.  It operates at a high-frequency to match the higher frequency data the cable plant is designed to carry. This allows the tone to overcome competing data signals and aggressive low-frequency terminations of Ethernet switches. That means LAN cabling technicians can quickly zero in on the right cable during installations or troubleshooting. 

Digital toning is especially helpful once the cable has been located as it displays cable wiremap and checks for shorts, opens and miswires.  The IntelliTone Pro 200 probe has an RJ45 input port and CableMap feature, allowing it to be plugged directly into a patch panel or wall port.  The benefit of this wiremap test is two-fold.  It eliminates the need for both a toner to a wiremapper, and provides 100% confirmation that the right cable has been located.

When to use analog
IntelliTone Pro’s SmartTone analog toning can be used on voice-grade cabling (Cat 3 and below), as well as coax, security/alarm, and speaker wiring.  These cables are optimized for lower frequency transmissions, and therefore are more easily isolated with a low-frequency tone.  It should also be used in areas with relatively low interference from electronic devices.  In high-interference environments, digital may still be a better choice.

SmartTone analog toning eliminates frustrating guesswork locating individual wire pairs during installations.  The SmartTone analog signal will change ‘songs’ each time the pair under test is shorted together.  This provides telecom technicians a decisive way to identify individual wire pairs before punching them down on a jack or a block, or when diagnosing voice transmission problems.

Locate and Isolate Cabling

Isolate Terminated Cables 

The IntelliTone™ Pro Toner uses the unique properties of twisted pair cabling to create a balanced signal that minimizes the effect of signal bleed. The smart digital signal processing in the IntelliTone™ Pro Probe clearly identifies this signal with audio and LED visual indicators, allowing you to rapidly isolate the correct cable from a bundle or on a patch panel. IntelliTone™ eliminates hours of cable confusion—and you can count on getting it right the first time.Isolate Individual Wire Pairs
With traditional analog toners and probes, isolating individual wire pairs precisely can be almost impossible because of signal bleed between pairs.  As a result, wire pairs are often routed and terminated incorrectly the first time. Redoing incorrect terminations or pulling new wiring wastes tremendous amounts of time and money.  IntelliTone Pro’s SmartTone analog technology cuts out the guesswork and improves accuracy by providing definitive confirmation when the pair under test is located.  Just short the pair under test, and the audible tone will change its cadence.  The difference is dramatic.

Verify Cable Continuity

Eliminate callbacks during cabling moves, adds and changes with the powerful diagnostic capabilities of IntelliTone. The IntelliTone Pro 200 Probe features a CABLEMAP capability that identifies common cable miswires in twisted pair cabling. IntelliTone technology automates the testing of each conductor for end-to-end continuity; LED lights and tones clearly indicate miswires such as opens, shorts or reversed pairs.

Tone Live Networks

Modern network devices use aggressive termination schemes for cables connected to their ports. While this termination reduces noise and crosstalk in the cable, it can also absorb an analog toner signal, making the connected cable impossible to detect with an analog audio probe. The result is that locating an unlabeled network can take hours with analog technology. Unlike analog signals, the IntelliTone digital signal stays strong despite common mode termination. And the IntelliTone Pro Toner automates toning individual cable conductors, making it quick, efficient and safe to locate cables on active networks.

Verify Ethernet Service

Perform moves, adds and changes with powerful diagnostic capabilities of the IntelliTone Pro 200 Toner & Probe

Toning - IntelliTone makes it easy to quickly locate the cable in the equipment closet when performing moves, adds and changes. Unconnected cable can be quickly isolated in the presence of bleed. 

Cablemap - The IntelliTone Pro 200 Probe features a CABLEMAP capability that identifies common cable miswires in twisted pair cabling. Complete per-pin verification of TIA568 wiring identifies the exact wire that is open, shorted or miswired. LED lights and distinctive tones clearly indicate miswires. The built-in Cablemap feature eliminates the need to carry separate tools or returning to the far-end to replace the toner with a mapper. The IntelliTone Pro 200 Kit is the all-in-one tool to locate and map Category 5 cabling even when plugged into a switch, and verify link service after moves, adds and changes. 

Verify Ethernet Service - Is the link pulse correct, reversed due to a swap cable of uplink port, or MDIX capable? Identify active Ethernet services present at the office wallplate. LED lights clearly indicate the presence of normal, reversed or MDIX Ethernet link connectivity.



Operating temperature

32 °F to 104 °F (0 °C to 40 °C)

Storage temperature

-4 °F to +140°F (-20 °C to °C)

Operating relative humidity (% RH without condensation)

95 % (50 °F to 95 °F; 10 oC to 35 °C)
75 % (95 °F to 104 °F; 35 °C to 40 °C) Uncontrolled < 50 °F (< 10 °C)


Random, 2 g, 5 Hz-500 Hz


1 m drop test


EN 61010-1, Category: None


3000 m


EN 61326-1, FCC Part 15 B

Battery type and life

9 V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical


Copper cabling media including; 75 or 50 Ohm Coaxial cable; Two Conductor control, security, generic cabling. 10 Base-T or 10/100 Base-T datacom networks. UTP cable. Shielded Twisted Pair supported in Cablemap function of the IntelliTone 200.




5.54 in x 2.94 in x 1.25 in (14.1 cm x 7.5 cm x 3.2 cm)




Thumbwheel switch

Toner interface

Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling. F Connector for coaxial cabling Banana Jack Plugs (2) - two conductor wiring

Toner frequency

IntelliTone™ signal: encoded digital signal
Analog SmartTone signal: 500 - 1200Hz, 4 songs

Ouptut power

5 V p-p

Auto power down

Turns off automatically after 2 1/2 hours of inactivity




8.73 in x 1.88 in x 1.26 in (22.2 cm x 4.8 cm x 3.2 cm)


(8) LED indicators, Sync LED indicator


IntelliTone: Microprocessor controlled audio files
Analog: Detected toner signal


Thumbwheel switch, volume control wheel

Tone detection

Detects IntelliTone™ digital signal for Locate, Isolate, and CableMap
Detects analog SmartTone signal (500-1200Hz) and other analog toners.

Toner interface

Main Mod8 port for cablemap on all 4 pairs of UTP / STP cabling.

Auto power down

Turns off automatically after 1 hour of inactivity

MT-8200-63A - IntelliTone Pro 200 Probe Includes: IntelliTone Pro 200 Probe, RJ11 and RJ45 patch cables, lanyard, quick start guide, and 9-volt battery

Why shop with Synergix International, UAE’s leading online seller of Fluke Networks testers?

Synergix International is proud to supply a huge range of cable testers, fiber testers, phone testers, hand tools, certification testers, cable fault diagnostics equipment, fiber cleaning tools, termination tools and more from Fluke Networks. You can buy Fluke Networks online through our website 24/7 for fast and reliable delivery.

Synergix International is one of UAE's leading online sellers of data products & accessories. Backed by the Synergix Group, we have access to the biggest brands such as Fluke Networks, Fluke Industrial, NetScout, Viavi Solutions, Infilink technologies, INNO Instruments, Ekahau, Altai Technologies, Kyoritsu, AiRISTA, Amprobe , Motwane and more - as well as the very best pricing & quick delivery.

Here are just a few reasons our customers keep coming back:

  1. Free shipping on orders over 3000 AED
  2. Secure payment methods (VISA, Mastercard & PayPal)
  3. Stock fulfilment from free zone and locally
  4. Helpful support base located in Dubai, UAE (call +971 4 320 6053 to speak with us)
  5. 24/7 Online chat support

If you are looking for Fluke Networks testing equipment that is not currently listed on our website, please get in contact with us for pricing and lead-times. We have direct partnerships with all suppliers and can source just about anything quickly and at a great price.

Get in touch with us today +971 4 320 6053!

Product Video

Write Your Own Review

You're reviewing: MT-8200-63A

How do you rate this product? *
1 1 star
2 2 star
3 3 star
4 4 star
5 5 star
Make an Enquiry

* Required Fields

Essential Extras