+971 4 320-6053

Welcome to Synergix International!

Gallery loading...
Mouseover Zoom loading...

MT-8200-61-TNR

IntelliTone Pro 200 LAN Toner

This product, you earn 15 loyalty point(s).
AED 618.75

Availability: In stock

Description

Description

Fluke Networks IntelliTone Pro200 Tone Generator (MT-8200-61-TNR)

  1. Verifies and troubleshoots virtually any copper cabling in data com networks, identifying the type of service and testing for continuity
  2. Supports VDV cable types including RJ45, RJ11, coaxial, and bare wire (banana jacks accommodate alligator clip test leads)
  3. Generates IntelliTone digital signals for locating data cabling on active networks, and Smart Tone analog signals for locating voice, audio, and video cabling on inactive networks

Features

Digital vs Analog

Only IntelliTone™ Pro Toners and Probes offer the powerful combination of digital and analog technologies to resolve common infrastructure problems that arise during installing, maintaining, and changing of your network. Digital and analog toning in one tool. Today’s media networks are more diverse than ever.  Most buildings have a combination of telephone, twisted-pair data, coax, and security/alarm wiring.  Verifying proper routing and termination of this diverse set of cabling types requires tools optimized for different frequencies, connector types, and work environments.  Until now, no single tool has combined the right technologies to operate across all copper media types, and in all environments.  IntelliTone Pro changes that by combining cutting-edge digital and analog signaling to locate and verify virtually any copper cable, regardless of application or environment. 

When to use digitalIntelliTone Pro’s digital encoded signal should primarily be used on high-grade data cabling (Cat 5e/6/6a), and in active network environments.  It operates at a high-frequency to match the higher frequency data the cable plant is designed to carry. This allows the tone to overcome competing data signals and aggressive low-frequency terminations of Ethernet switches. That means LAN cabling technicians can quickly zero in on the right cable during installations or troubleshooting. 

Digital toning is especially helpful once the cable has been located as it displays cable wiremap and checks for shorts, opens and miswires.  The IntelliTone Pro 200 probe has an RJ45 input port and CableMap feature, allowing it to be plugged directly into a patch panel or wall port.  The benefit of this wiremap test is two-fold.  It eliminates the need for both a toner to a wiremapper, and provides 100% confirmation that the right cable has been located.

When to use analogIntelliTone Pro’s SmartTone analog toning can be used on voice-grade cabling (Cat 3 and below), as well as coax, security/alarm, and speaker wiring.  These cables are optimized for lower frequency transmissions, and therefore are more easily isolated with a low-frequency tone.  It should also be used in areas with relatively low interference from electronic devices.  In high-interference environments, digital may still be a better choice.

SmartTone analog toning eliminates frustrating guesswork locating individual wire pairs during installations.  The SmartTone analog signal will change ‘songs’ each time the pair under test is shorted together.  This provides telecom technicians a decisive way to identify individual wire pairs before punching them down on a jack or a block, or when diagnosing voice transmission problems.

Locate and Isolate Cabling

Isolate Terminated Cables 

The IntelliTone™ Pro Toner uses the unique properties of twisted pair cabling to create a balanced signal that minimizes the effect of signal bleed. The smart digital signal processing in the IntelliTone™ Pro Probe clearly identifies this signal with audio and LED visual indicators, allowing you to rapidly isolate the correct cable from a bundle or on a patch panel. IntelliTone™ eliminates hours of cable confusion—and you can count on getting it right the first time.Isolate Individual Wire PairsWith traditional analog toners and probes, isolating individual wire pairs precisely can be almost impossible because of signal bleed between pairs.  As a result, wire pairs are often routed and terminated incorrectly the first time. Redoing incorrect terminations or pulling new wiring wastes tremendous amounts of time and money.  IntelliTone Pro’s SmartTone analog technology cuts out the guesswork and improves accuracy by providing definitive confirmation when the pair under test is located.  Just short the pair under test, and the audible tone will change its cadence.  The difference is dramatic.

Verify Cable Continuity

Eliminate callbacks during cabling moves, adds and changes with the powerful diagnostic capabilities of IntelliTone. The IntelliTone Pro 200 Probe features a CABLEMAP capability that identifies common cable miswires in twisted pair cabling. IntelliTone technology automates the testing of each conductor for end-to-end continuity; LED lights and tones clearly indicate miswires such as opens, shorts or reversed pairs.

Tone Live Networks

Modern network devices use aggressive termination schemes for cables connected to their ports. While this termination reduces noise and crosstalk in the cable, it can also absorb an analog toner signal, making the connected cable impossible to detect with an analog audio probe. The result is that locating an unlabeled network can take hours with analog technology. Unlike analog signals, the IntelliTone digital signal stays strong despite common mode termination. And the IntelliTone Pro Toner automates toning individual cable conductors, making it quick, efficient and safe to locate cables on active networks.

Verify Ethernet Service

Perform moves, adds and changes with powerful diagnostic capabilities of the IntelliTone Pro 200 Toner & ProbeToning - IntelliTone makes it easy to quickly locate the cable in the equipment closet when performing moves, adds and changes. Unconnected cable can be quickly isolated in the presence of bleed. Cablemap - The IntelliTone Pro 200 Probe features a CABLEMAP capability that identifies common cable miswires in twisted pair cabling. Complete per-pin verification of TIA568 wiring identifies the exact wire that is open, shorted or miswired. LED lights and distinctive tones clearly indicate miswires. The built-in Cablemap feature eliminates the need to carry separate tools or returning to the far-end to replace the toner with a mapper. The IntelliTone Pro 200 Kit is the all-in-one tool to locate and map Category 5 cabling even when plugged into a switch, and verify link service after moves, adds and changes. Verify Ethernet Service - Is the link pulse correct, reversed due to a swap cable of uplink port, or MDIX capable? Identify active Ethernet services present at the office wallplate. LED lights clearly indicate the presence of normal, reversed or MDIX Ethernet link connectivity.

Specifications

GENERAL SPECS

Operating temperature

32 °F to 104 °F (0 °C to 40 °C)

Storage temperature

-4 °F to +140°F (-20 °C to °C)

Operating relative humidity (% RH without condensation)

95 % (50 °F to 95 °F; 10 oC to 35 °C) 75 % (95 °F to 104 °F; 35 °C to 40 °C) Uncontrolled < 50 °F (< 10 °C)

Vibration

Random, 2 g, 5 Hz-500 Hz

Shock

1 m drop test

Safety

EN 61010-1, Category: None

Altitude

3000 m

EMC

EN 61326-1, FCC Part 15 B

Battery type and life

9 V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical

Applications

Copper cabling media including; 75 or 50 Ohm Coaxial cable; Two Conductor control, security, generic cabling. 10 Base-T or 10/100 Base-T datacom networks. UTP cable. Shielded Twisted Pair supported in Cablemap function of the IntelliTone 200.

 

TONER SPECS

Dimensions

5.54 in x 2.94 in x 1.25 in (14.1 cm x 7.5 cm x 3.2 cm)

Display

LED

Control

Thumbwheel switch

Toner interface

Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling. F Connector for coaxial cabling Banana Jack Plugs (2) - two conductor wiring

Toner frequency

IntelliTone™ signal: encoded digital signal Analog SmartTone signal: 500 - 1200Hz, 4 songs

Ouptut power

5 V p-p

Auto power down

Turns off automatically after 2 1/2 hours of inactivity

 

PROBE SPECS

Dimensions

8.73 in x 1.88 in x 1.26 in (22.2 cm x 4.8 cm x 3.2 cm)

Display

(8) LED indicators, Sync LED indicator

Audio

IntelliTone: Microprocessor controlled audio files Analog: Detected toner signal

Control

Thumbwheel switch, volume control wheel

Tone detection

Detects IntelliTone™ digital signal for Locate, Isolate, and CableMap Detects analog SmartTone signal (500-1200Hz) and other analog toners.

Toner interface

Main Mod8 port for cablemap on all 4 pairs of UTP / STP cabling.

Auto power down

Turns off automatically after 1 hour of inactivity

 

MT-8200-61-TNR - IntelliTone Pro 200 LAN Toner Includes: IntelliTone Pro 200 LAN Toner, coax F connector adapter, RJ11 and RJ45 patch cables, test leads with alligator clips, lanyard, quick start guide, and 9-volt battery

Why shop with Synergix International, UAE’s leading online seller of Fluke Networks testers?

Synergix International is proud to supply a huge range of cable testers, fiber testers, phone testers, hand tools, certification testers, cable fault diagnostics equipment, fiber cleaning tools, termination tools and more from Fluke Networks. You can buy Fluke Networks online through our website 24/7 for fast and reliable delivery.

Synergix International is one of UAE's leading online sellers of data products & accessories. Backed by the Synergix Group, we have access to the biggest brands such as Fluke Networks, Fluke Industrial, NetScout, Viavi Solutions, Infilink technologies, INNO Instruments, Ekahau, Altai Technologies, Kyoritsu, AiRISTA, Amprobe , Motwane and more - as well as the very best pricing & quick delivery.

Here are just a few reasons our customers keep coming back:

  1. Free shipping on orders over 3000 AED
  2. Secure payment methods (VISA, Mastercard & PayPal)
  3. Stock fulfilment from free zone and locally
  4. Helpful support base located in Dubai, UAE (call +971 4 320 6053 to speak with us)
  5. 24/7 Online chat support

If you are looking for Fluke Networks testing equipment that is not currently listed on our website, please get in contact with us for pricing and lead-times. We have direct partnerships with all suppliers and can source just about anything quickly and at a great price.

Get in touch with us today +971 4 320 6053!

Product Video
Reviews

Write Your Own Review

You're reviewing: MT-8200-61-TNR

How do you rate this product? *
 
1 1 star
2 2 star
3 3 star
4 4 star
5 5 star
Price
Quality
ATTACHMENTS
Make an Enquiry

* Required Fields

Essential Extras